Our Products

Below is a listing of most of our inventory. If you would like more information or a quote, please follow the instructions provided by filling out the 'Your Information' form and adding a check mark to the parts you are interested in.

Step 1: Check the product box(es) on this page that you are interested in receiving a quote for.
Step 2: Fill out the form below with your information.
Step 3: Click the Submit button to send your request to us and we will be in touch with your quote soon.

Your Information

100100600CR
Read more

Compatible with Cresswood®, 1″ Concave Cutter, Raised Center, D2 Material, Use with Holder 100100HC

Check box to add to quote request
100100600F
Read more

Compatible with Cresswood®, 1″ Flat Cutter, D2 Material, Use with Holder 100100HC

Check box to add to quote request
11711747CS
Read more

Linder® compatible 117 mm concave cutter with countersunk hole, D2 Material, for Jupiter Model 3200

Check box to add to quote request
150150500F
Read more

Montgomery Hog® compatible 1.500″ x 1.500″ x .500″ Flat Cutter 1/2-13 tapped hole, D2 Material

Check box to add to quote request
150150838C5-8
Read more

West Salem® compatible 1.500″ Concave Cutter with 5/8 – 18 thread, for Model 1674HT, OEM# 233110, 210-07-02-02

Check box to add to quote request
150150HC
Read more

Compatible with Cresswood®, 1.5″ counter-bored Holder. Use for 150150812CR

Check box to add to quote request
15WLK2364015
Read more

Weima® compatible right hand anvil, 9.287″ x 4.598″ x 0.610″, 3 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000533

Check box to add to quote request
15WLK2794015
Read more

Weima® compatible right center anvil, 10.997″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000534

Check box to add to quote request
15WLK2924015
Read more

Weima® compatible left hand anvil, 11.510″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000537

Check box to add to quote request
15WLK3354015C
Read more

Weima® compatible center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536

Check box to add to quote request
15WLK3354015L
Read more

Weima® compatible left center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536

Check box to add to quote request
1600VAZ40M
Read more

Vecoplan® compatible anvil, 10.119″ x 3.790″ x 1.064″, 6pc set, 5 full teeth, 2 half teeth, reversible, flat teeth, 3 counter-sunk holes, D2 Material, for Model VAZ1300 and VAZ1600M, OEM# 3590420235, 3590420237, 3591000766

Check box to add to quote request
1750H
Read more

REI® compatible bolt-on holder, 4140 material, use with 175700RD Cutter

Check box to add to quote request
175700RD
Read more

Compatible with REI®, 1.75″ Diameter round cutter x .695 thick, D2 Material, Use with Holder 1750H, for Model Renegade

Check box to add to quote request
1800VAZ40MC
Read more

Vecoplan® compatible flat reversible anvil, 5 full teeth, 2 half teeth, 3 counterbored slots, 2 tapered holes, for 40 mm cutter center, 3 or 4 per set, D2 Material, for Model VAZ1800 F&F, RG52, RG62, OEM# 3591000803M, 3591000804C

Check box to add to quote request
1800VAZ40MCTR
Read more

Vecoplan® compatible center anvil, flat 5 full teeth, 2 half teeth, D2 Material, for Model VAZ1800 F&F, RG52, and RG62, OEM# 3590000431, 3591000802C

Check box to add to quote request
1800VAZ40ME
Read more

Vecoplan® compatible flat reversible anvil, 5 full teeth, 2 half teeth, 3 counterbored slots, 2 tapered holes, for 40 mm cutter, 2 per set, D2 Material, for Model VAZ1800 F&F, RG52 , RG62, OEM# 3591000802L, 3591000804R

Check box to add to quote request
1800VAZ40ML
Read more

Vecoplan® compatible left hand anvil, flat 5 full teeth, 2 half teeth, D2 Material, for Model VAZ1800 F&F, RG52, and RG62, OEM# 3590000431, 3591000802L

Check box to add to quote request
1800VAZ40MR
Read more

Vecoplan® compatible end anvil, flat 5 full teeth, 2 half teeth, D2 Material, for Model VAZ1800 F&F, RG52, and RG62, OEM# 3590000431, 3591000802R

Check box to add to quote request
200200100F
Read more

West Salem® compatible 2.000″ flat cutter, D2 Material, for Model 3456GRI-HP, OEM# B721352-1

Check box to add to quote request
303015C1-2
Read more

Granutech® compatible 30mm concave cutter, 1/2-13 thread, D2 material, OEM# B229600

Check box to add to quote request
303019CR
Read more

Compatible with Weima®, 30mm Concave, Raised Center Cutter, D2 Material

Check box to add to quote request
403015CB
Read more

Compatible with Weima® Broaching Knife Weima 40mm x 30mm x 15mm with counterbored slot, D2 Material

Check box to add to quote request
404012F
Read more

Holzmag® compatible 1.575″ flat cutter, D2 Material

Check box to add to quote request
404020C5-8
Read more

Compatible with Granutech®, 40mm Concave Cutter, D2 Material. Use with Holder 4040GHC

Check box to add to quote request
404020CBT
Read more

Scan Hugger® compatible 40mm flat cutter, bored with taper, D2 Material, for HL Series shredder, OEM# KN31012050

Check box to add to quote request
404020CF
Read more

Vecoplan® compatible 40mm concave cutter, angled corner, D2 Material, for Model V-Echo, OEM# 3530000239

Check box to add to quote request
404020CR
Read more

Compatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.

Check box to add to quote request
404020CRS
Read more

Compatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.

Check box to add to quote request
404023CS
Read more

Compatible with Weima®40mm concave, serrated edges, D2 Material, Uses Holder 4040WHC or 4040WHCB

Check box to add to quote request
404025C-M12
Read more

Guidetti® compatible 40mm concave cutter, M12 thread, D2 Material

Check box to add to quote request
404025CC
Read more

40mm Concave Cutter, Tungsten Carbide Coat Face Only, D2 Material

Check box to add to quote request
404025F
Read more

Compatible with Vecoplan®, 40mm Flat Nip, D2 Material

Check box to add to quote request
404025FC
Read more

Compatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.

Check box to add to quote request
404025FCS
Read more

Compatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.

Check box to add to quote request
4040GHC
Read more

Granutech® compatible 40mm holder, weld-in cutout, 4140 material, OEM# B212400

Check box to add to quote request
4200RGLHF
Read more

Vecoplan® compatible left hand anvil, flat top tooth, D2 Material, for Model RG42UXL, RS42/60XL, VAZ 1100P, VHZ 1600, OEM# 3591000539L

Check box to add to quote request
4200RGRH
Read more

Vecoplan® compatible right hand anvil, D2 Material, for Model RG42, RG42/60XL, VAZ1100, OEM# 3590000325, 3590000338, 3591000535R

Check box to add to quote request
4200RGRHF
Read more

Vecoplan® compatible right hand anvil, flat top tooth, D2 Material for Model RG42UXL, RS42/60XL, VAZ 1100P, VHZ 1600, OEM# 3590000402, 3590000327, 3591000538R

Check box to add to quote request
505020CR
Read more

Weima® compatible 50mm concave cutter, D2 Material, for Model WT1800, OEM# 009001000084

Check box to add to quote request
52150RGCTR
Read more

Vecoplan® compatible center anvil, 9 full teeth, 2 half teeth, 4 counterbored holes, D2 Material, for Model RG52/150SPK FF and RG5200, OEM# 3590000167, 3590000355, 3591000181, 3591000599

Check box to add to quote request
52150RGLH
Read more

Vecoplan® compatible left hand anvil, 9 full teeth, 2 half teeth, 4 counterbored holes, D2 Material, for Model RG52/150SPK FF and RG5200, OEM# 3590000167, 3590000355, 3591000179, 3591000598

Check box to add to quote request
52150RGRH
Read more

Vecoplan® compatible right hand anvil, 9 full teeth, 2 half teeth, 4 counterbored holes, D2 Material, for Model RG52/150SPK FF and RG5200, OEM# 3590000167, 3590000355, 3591000180, 3591000597

Check box to add to quote request
606030CR
Read more

Compatible with Vecoplan®, AEC®, Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® 60mm Concave Cutter, raised center, D2 Material, uses holder 6060HC, OEM# ZXS1500-SP-01

Check box to add to quote request
606030CRS
Read more

Vecoplan® compatible 60mm concave raised serrated cutter, D2 Material

Check box to add to quote request
606030F
Read more

Compatible with Vecoplan® 60mm Flat Cutter, D2 Material, Uses Holder 6060HC

Check box to add to quote request
62150RGLCTRS
Read more

Vecoplan® compatible left hand center anvil, 10 full teeth, 1 half tooth, sharp tooth, D2 Material, for Model RG62/150UXL, OEM# 3590000412

Check box to add to quote request
62150RGLHS
Read more

Vecoplan® compatible left hand anvil, 7 full teeth, 2 half teeth, sharp tooth, D2 Material, for Model RG62/150UXL, OEM# 3590000412

Check box to add to quote request
62150RGLHXL
Read more

Vecoplan® compatible left hand anvil, 18 full teeth, 1 half tooth, 8 counterbored slots, raised tooth, D2 Material, for Model RG62/150UXL, RG62/200XL

Check box to add to quote request
62150RGRCTRS
Read more

Vecoplan® compatible right hand center anvil, 10 full teeth, 1 half tooth, sharp tooth, D2 Material, for Model RG62/150UXL, OEM# 3590000412

Check box to add to quote request
62150RGRHS
Read more

Vecoplan® compatible right hand anvil, 7 full teeth, 2 half teeth, sharp tooth, D2 Material, for Model RG62/150UXL, OEM# 3590000412

Check box to add to quote request
62150RGRHXL
Read more

Vecoplan® compatible right hand anvil, 18 full teeth, 1 half tooth, 8 counterbored slots, raised tooth, D2 Material, for Model RG62/150UXL, RG62/200XL

Check box to add to quote request
62200RGCTR
Read more

Vecoplan® compatible center anvil, 14 full teeth, 6 counterbored slots, narrow flat on tooth, D2 Material, for Model RG62/200XL, RG62/125 UXL shorty, RG62 shorty VAZ 200/160 K, OEM# 3590000452, 3590000453, 3591000861

Check box to add to quote request
62200RGLH
Read more

Vecoplan® compatible left hand anvil, 11 full teeth, 1 half tooth, 5 counterbored slots, narrow flat on tooth, D2 Material, for Model RG62/200XL, RG62/125 UXL shorty, RG62 shorty VAZ 200/160 K, OEM# 3590000452, 3590000453, 3591000860

Check box to add to quote request
62200RGRH
Read more

Vecoplan® compatible right hand anvil, 11 full teeth, 1 half tooth, 5 counterbored slots, narrow flat on tooth, D2 Material, for Model RG62/200XL, RG62/125 UXL shorty, RG62 shorty VAZ 200/160 K, OEM# 3590000452, 3590000453, 3591000862

Check box to add to quote request
70200RGXL
Read more

Vecoplan® compatible flat reversible anvil, 10 full teeth, 1 half tooth, sharp teeth, 2 cutting edges, 4 counterbored slots, D2 Material, for Model RG70/200K, RG70/200XLT, VAZ1800XL, OEM# 3590000201

Check box to add to quote request
808045C
Read more

Vecoplan® compatible 80mm concave cutter, D2 Material

Check box to add to quote request
808045CR
Read more

Compatible with Vecoplan® 80mm Concave, Raised Center, D2 Material. Uses Holder 8080HC or 8080HCHF.

Check box to add to quote request
8080HCHF
Read more

Vecoplan® compatible 80mm holder, counterbored, hard face on two sides, CRS material, use for 808045CR or 808045C, OEM# 7309200063

Check box to add to quote request
9825080RGCTR
Read more

Vecoplan® compatible center anvil, reversible, 5 full teeth, D2 Material, for Model RG98

Check box to add to quote request
9825080RGLHRH
Read more

Vecoplan® compatible left or right hand anvil, reversible, 4 full teeth, 1 half tooth, D2 Material, for Model RG98

Check box to add to quote request
AEC2798030
Read more

AEC®, Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® compatible anvil, 7 teeth, D2 Material, OEM# ESS80001202

Check box to add to quote request
CW1004010BP
Read more

Cresswood® compatible bed plate for anvil, 1-1/4″ shredder, 6 full teeth, 2 half teeth, 2 countersunk holes, 3 drill trough holes, Mild Steel Material, OEM# G40133

Check box to add to quote request
CW10040625DE
Read more

Cresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80246

Check box to add to quote request
CW1204010BP
Read more

Cresswood® compatible 12″ bed plate for anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 drill through holes, D2 Material, OEM# G60226

Check box to add to quote request
CW12040625DE
Read more

Cresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80006

Check box to add to quote request
GU28229728E
Read more

Guidetti® compatible anvil, 4 full teeth, 3 slots, 3 per set, D2 Material

Check box to add to quote request
GU2829728CTR
Read more

Guidetti® compatible anvil, 4 full teeth, 3 slots, 3 per set, D2 Material

Check box to add to quote request
REI1003001075
Read more

REI® compatible 10.750″ reversible anvil, 6 notches, 3 countersunk holes, D2 Material

Check box to add to quote request
REI100300700
Read more

REI® compatible 7″ reversible anvil, 4 notches, 2 countersunk holes, D2 Material

Check box to add to quote request
REI100300888
Read more

REI® compatible 8.875″ reversible anvil, 5 notches, 3 countersunk holes with narrow hole spacing, D2 Material

Check box to add to quote request
RMP 0010603A
Read more

Republic® compatible 1.568″ x 2.121″ x 0.877″ Zodial Cutter, M14 x 2.0 thread, D2 Material, OEM# RMP 0010603A

Check box to add to quote request
404023CR
Read more

Compatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC

Check box to add to quote request
404020C
Read more

Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2

Check box to add to quote request
404023C
Read more

Weima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC

Check box to add to quote request
404020F
Read more

Compatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL

Check box to add to quote request
4040WHC
Read more

Weima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR

Check box to add to quote request
4040WHCB
Read more

Weima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR

Check box to add to quote request
4040H
Read more

Compatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F

Check box to add to quote request
M1217545FL
Read more

Serrated Flange Type Cutter Bolt, Fits 40mm cutter

Check box to add to quote request
4040HC
Read more

Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F

Check box to add to quote request
125125745CG
Read more

Cresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.

Check box to add to quote request
125125745CR
Read more

Cresswood® 1-1/4″ Crown Style with Raised Center, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC

Check box to add to quote request
125125745F
Read more

Cresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC

Check box to add to quote request
4040HCL
Read more

Compatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.

Check box to add to quote request
125125HC
Read more

Cresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR

Check box to add to quote request
606030C
Read more

Compatible with Vecoplan®/Retech, Weima® 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2, for Weima® Model Jumbo 18, OEM# 3530000130

Check box to add to quote request
606030C-M12
Read more

Compatible with Guidetti 60mm concave Style, 60mm x 60mm x 30mm – Material: D2.

Check box to add to quote request
606030C-M18
Read more

Compatible with Vecoplan®/Retech 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2.

Check box to add to quote request
B500-20X2
Read more

1/2-20 x 2″ Socket Head Cap Screw Fits Cresswood cutters

Check box to add to quote request
M1217565
Read more

Cutter bolt Socket Head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher

Check box to add to quote request
M1217565H
Read more

Cutter bolt hex head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher

Check box to add to quote request
M1217570
Read more

Cutter bolt Socket Head Fits: 40mm raised center Uses M12HCLW – Lockwasher

Check box to add to quote request
M1217570H
Read more

Cutter bolt hex head Fits: 40mm raised center Uses M12HCLW – Lockwasher

Check box to add to quote request
323220CR
Read more

Shred Tech® Crown Style with Raised Center, 32mm X 32mm X 20mm – Material: D2

Check box to add to quote request
M1217555
Read more

Holder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher

Check box to add to quote request
343420CR
Read more

AEC 34mm Crown Style with Raised Center. 34MM X 34mm X 20mm – Material: D2 Uses Holder: 3434HC Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders

Check box to add to quote request
M1620045
Read more

Bed Knife Bolt

Check box to add to quote request
3434HC
Read more

AEC® 34mm Holder, 2 mounting holes for M8 fastener. Hardware Available Upon Request. Used for 343420CR. Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders.

Check box to add to quote request
150150812CR
Read more

Cresswood® 1-1/2″ Crown Style with Raised Center. 1-1/2″ X 1-1/2″ X 13/16″ – Material: D2. Uses Holder:

Check box to add to quote request
M1217540
Read more

Hardware Fits: AEC 34mm Holder 3434HC

Check box to add to quote request
Your Part Coming Soon
Read more

If you didn’t see your particular part, then please fill out as much information on the form to your left and well will work on reverse engineering it to meet or exceed OEM standards.

Check box to add to quote request
404025C
Read more

Chinese Shredder Crown Style. 40mm X 40mm X 25mm – Material: D2

Check box to add to quote request