Description
| Make | Vecoplan® |
|---|---|
| OEM Number | 3530000080 |
| C-C Number | 404020C |
| Length | 1.575 |
| Width | 1.575 |
| Thickness | 0.787 |
| Knife Type | Concave |
| Reversible | No |
| # Cutting Edges | 4 |
| # of Holes | 1 |
| Hole Type | TPD |
| Thread | M12 x 1.75 |
404020C
Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
You may also like…
-
70200RGXL
Read moreVecoplan® compatible flat reversible anvil, 10 full teeth, 1 half tooth, sharp teeth, 2 cutting edges, 4 counterbored slots, D2 Material, for Model RG70/200K, RG70/200XLT, VAZ1800XL, OEM# 3590000201
-
404020C5-8
Read moreCompatible with Granutech®, 40mm Concave Cutter, D2 Material. Use with Holder 4040GHC
-
4040GHC
Read moreGranutech® compatible 40mm holder, weld-in cutout, 4140 material, OEM# B212400
-
4040HC
Read moreCompatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
-
1800VAZ40MC
Read moreVecoplan® compatible flat reversible anvil, 5 full teeth, 2 half teeth, 3 counterbored slots, 2 tapered holes, for 40 mm cutter center, 3 or 4 per set, D2 Material, for Model VAZ1800 F&F, RG52, RG62, OEM# 3591000803M, 3591000804C
-
M1217565H
Read moreCutter bolt hex head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher
-
404020CRS
Read moreCompatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
-
M1217565
Read moreCutter bolt Socket Head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher
-
404020F
Read moreCompatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
-
404020CR
Read moreCompatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
-
1800VAZ40ME
Read moreVecoplan® compatible flat reversible anvil, 5 full teeth, 2 half teeth, 3 counterbored slots, 2 tapered holes, for 40 mm cutter, 2 per set, D2 Material, for Model VAZ1800 F&F, RG52 , RG62, OEM# 3591000802L, 3591000804R
-
4040H
Read moreCompatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
-
4040HCL
Read moreCompatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Related products
-
606030C
Read moreCompatible with Vecoplan®/Retech, Weima® 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2, for Weima® Model Jumbo 18, OEM# 3530000130
-
M1217570H
Read moreCutter bolt hex head Fits: 40mm raised center Uses M12HCLW – Lockwasher
-
B500-20X2
Read more1/2-20 x 2″ Socket Head Cap Screw Fits Cresswood cutters
-
343420CR
Read moreAEC 34mm Crown Style with Raised Center. 34MM X 34mm X 20mm – Material: D2 Uses Holder: 3434HC Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders