Description
| Make | Cresswood® |
|---|---|
| OEM Number | 80525
80400 |
| C-C Number | 125125745CG |
| Length | 1.250 |
| Width | 1.250 |
| Thickness | 0.745 |
| Knife Type | Concave |
| Reversible | No |
| # Cutting Edges | 4 |
| # of Holes | 1 |
| Hole Type | Counter Bored |
| Thread |
125125745CG
Cresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.
You may also like…
-
125125745CR
Read moreCresswood® 1-1/4″ Crown Style with Raised Center, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
CW1204010BP
Read moreCresswood® compatible 12″ bed plate for anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 drill through holes, D2 Material, OEM# G60226
-
B500-20X2
Read more1/2-20 x 2″ Socket Head Cap Screw Fits Cresswood cutters
-
CW1004010BP
Read moreCresswood® compatible bed plate for anvil, 1-1/4″ shredder, 6 full teeth, 2 half teeth, 2 countersunk holes, 3 drill trough holes, Mild Steel Material, OEM# G40133
-
125125HC
Read moreCresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR
-
CW10040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80246
-
125125745F
Read moreCresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
CW12040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80006
Related products
-
404020C
Read moreCompatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
-
M1217570
Read moreCutter bolt Socket Head Fits: 40mm raised center Uses M12HCLW – Lockwasher
-
606030C-M12
Read moreCompatible with Guidetti 60mm concave Style, 60mm x 60mm x 30mm – Material: D2.
-
150150812CR
Read moreCresswood® 1-1/2″ Crown Style with Raised Center. 1-1/2″ X 1-1/2″ X 13/16″ – Material: D2. Uses Holder: