Vecoplan® compatible anvil, 10.119″ x 3.790″ x 1.064″, 6pc set, 5 full teeth, 2 half teeth, reversible, flat teeth, 3 counter-sunk holes, D2 Material, for Model VAZ1300 and VAZ1600M, OEM# 3590420235, 3590420237, 3591000766
| Make | Vecoplan® |
| OEM Number | 3590420235 5pc,3590420237 6pc, 3591000766 |
| Shredder Model | VAZ1300, VAZ 1600M |
| C-C Number | 1600VAZ40M |
| Length | 10.119 |
| Width | 3.790 |
| Thickness | 1.064 |
| Knife Type | Angled Tooth |
| Reversible | No |
| Hole Type | CBS |
| Thread | M12x1.75 |
| Tooth Style | Sharp |
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
Compatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan®, 40mm Flat Nip, D2 Material
Vecoplan® compatible 40mm concave cutter, angled corner, D2 Material, for Model V-Echo, OEM# 3530000239
Compatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
Compatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
Compatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
Compatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Weima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR
Cresswood® 1-1/2″ Crown Style with Raised Center. 1-1/2″ X 1-1/2″ X 13/16″ – Material: D2. Uses Holder:
Serrated Flange Type Cutter Bolt, Fits 40mm cutter
Cresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.
Copyright 2023. Crumb-Cut / A-American Machine & Assembly Co.
