Description
| Make | Vecoplan® |
| OEM Number | |
| C-C Number | 404025F |
| Length | 1.575 |
| Width | 1.575 |
| Thickness | 0.984 |
| Knife Type | Flat |
| Reversible | No |
| # Cutting Edges | 4 |
| # of Holes | 1 |
| Hole Type | TPD |
| Thread | M12 x 1.75 |
404025F
Compatible with Vecoplan®, 40mm Flat Nip, D2 Material
You may also like…
-
404025FC
Read moreCompatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
-
4040HC
Read moreCompatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
-
4040H
Read moreCompatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
-
404025FCS
Read moreCompatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
-
4040HCL
Read moreCompatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Related products
-
125125HC
Read moreCresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR
-
404023CR
Read moreCompatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
-
606030C
Read moreCompatible with Vecoplan®/Retech, Weima® 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2, for Weima® Model Jumbo 18, OEM# 3530000130
-
125125745F
Read moreCresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC