Description
| Make | Vecoplan® |
| OEM Number | 3591000539L |
| Shredder Model | RG42UXL, RS42/60XL, VAZ 1100P, VHZ 1600 |
| C-C Number | 4200RGLHF |
| Length | 21.024 |
| Width | 4.260 |
| Thickness | 1.365 |
| Knife Type | Raised |
| Reversible | No |
| Hole Type | CBS |
| Thread | M12x1.75 |
| Tooth Style | Sharp |
4200RGLHF
Vecoplan® compatible left hand anvil, flat top tooth, D2 Material, for Model RG42UXL, RS42/60XL, VAZ 1100P, VHZ 1600, OEM# 3591000539L
You may also like…
-
4200RGRH
Read moreVecoplan® compatible right hand anvil, D2 Material, for Model RG42, RG42/60XL, VAZ1100, OEM# 3590000325, 3590000338, 3591000535R
-
404025FC
Read moreCompatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
-
4040HCL
Read moreCompatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
-
404020CF
Read moreVecoplan® compatible 40mm concave cutter, angled corner, D2 Material, for Model V-Echo, OEM# 3530000239
-
404020F
Read moreCompatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
-
404025FCS
Read moreCompatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
-
4040H
Read moreCompatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
-
4200RGRHF
Read moreVecoplan® compatible right hand anvil, flat top tooth, D2 Material for Model RG42UXL, RS42/60XL, VAZ 1100P, VHZ 1600, OEM# 3590000402, 3590000327, 3591000538R
-
4040HC
Read moreCompatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
-
404020C
Read moreCompatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
-
404020CR
Read moreCompatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
-
404025F
Read moreCompatible with Vecoplan®, 40mm Flat Nip, D2 Material
-
404020CRS
Read moreCompatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Related products
-
M1217570H
Read moreCutter bolt hex head Fits: 40mm raised center Uses M12HCLW – Lockwasher
-
404023C
Read moreWeima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
-
M1620045
Read moreBed Knife Bolt
-
Your Part Coming Soon
Read moreIf you didn’t see your particular part, then please fill out as much information on the form to your left and well will work on reverse engineering it to meet or exceed OEM standards.