Description
| Make | Cresswood® |
|---|---|
| OEM Number | 80362 |
| C-C Number | 125125HC |
| Length | 1.625 |
| Width | 1.250 |
| Thickness | 1.250 |
| Knife Type | |
| Reversible | No |
| # Cutting Edges | 0 |
| # of Holes | 1 |
| Hole Type | Counter Bored |
| Thread |
125125HC
Cresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR
You may also like…
-
B500-20X2
Read more1/2-20 x 2″ Socket Head Cap Screw Fits Cresswood cutters
-
CW1204010BP
Read moreCresswood® compatible 12″ bed plate for anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 drill through holes, D2 Material, OEM# G60226
-
125125745CR
Read moreCresswood® 1-1/4″ Crown Style with Raised Center, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
125125745CG
Read moreCresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.
-
CW10040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80246
-
125125745F
Read moreCresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
CW12040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80006
-
CW1004010BP
Read moreCresswood® compatible bed plate for anvil, 1-1/4″ shredder, 6 full teeth, 2 half teeth, 2 countersunk holes, 3 drill trough holes, Mild Steel Material, OEM# G40133
Related products
-
M1217545FL
Read moreSerrated Flange Type Cutter Bolt, Fits 40mm cutter
-
4040WHCB
Read moreWeima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR
-
606030C
Read moreCompatible with Vecoplan®/Retech, Weima® 60mm Crown Style, 60mm x 60mm x 30mm – Material: D2, for Weima® Model Jumbo 18, OEM# 3530000130
-
4040H
Read moreCompatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F