Description
| Make | REI® |
| C-C Number | 1750H |
| Length | 1.368 |
| Width | 1.750 |
| Thickness | 1.750 |
| Knife Type | Holder |
| Reversible | TPD |
| Hole Type | CS |
| Thread | 3/8-16 |
1750H
REI® compatible bolt-on holder, 4140 material, use with 175700RD Cutter
You may also like…
-
REI100300700
Read moreREI® compatible 7″ reversible anvil, 4 notches, 2 countersunk holes, D2 Material
-
175700RD
Read moreCompatible with REI®, 1.75″ Diameter round cutter x .695 thick, D2 Material, Use with Holder 1750H, for Model Renegade
-
REI1003001075
Read moreREI® compatible 10.750″ reversible anvil, 6 notches, 3 countersunk holes, D2 Material
-
REI100300888
Read moreREI® compatible 8.875″ reversible anvil, 5 notches, 3 countersunk holes with narrow hole spacing, D2 Material
Related products
-
M1217555
Read moreHolder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher
-
323220CR
Read moreShred Tech® Crown Style with Raised Center, 32mm X 32mm X 20mm – Material: D2
-
4040H
Read moreCompatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
-
404020F
Read moreCompatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL