Description
| Make | Cresswood® |
|---|---|
| OEM Number | 80019 |
| C-C Number | 125125745CR |
| Length | 1.250 |
| Width | 1.250 |
| Thickness | 0.745 |
| Knife Type | Raised |
| Reversible | No |
| # Cutting Edges | 4 |
| # of Holes | 1 |
| Hole Type | TPD |
| Thread | 1/2-20 |
125125745CR
Cresswood® 1-1/4″ Crown Style with Raised Center, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
You may also like…
-
B500-20X2
Read more1/2-20 x 2″ Socket Head Cap Screw Fits Cresswood cutters
-
CW1204010BP
Read moreCresswood® compatible 12″ bed plate for anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 drill through holes, D2 Material, OEM# G60226
-
CW12040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80006
-
125125HC
Read moreCresswood® 1-1/4″ Holder Counter Bore. Hardware available upon request. Use with 125125745CR
-
125125745F
Read moreCresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
CW1004010BP
Read moreCresswood® compatible bed plate for anvil, 1-1/4″ shredder, 6 full teeth, 2 half teeth, 2 countersunk holes, 3 drill trough holes, Mild Steel Material, OEM# G40133
-
125125745CG
Read moreCresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.
-
CW10040625DE
Read moreCresswood® compatible anvil for 1-1/4″ shredder, 6 full teeth, 2 half teeth, 3 countersunk holes, D2 material, OEM# 80246
Related products
-
M1217555
Read moreHolder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher
-
323220CR
Read moreShred Tech® Crown Style with Raised Center, 32mm X 32mm X 20mm – Material: D2
-
404020C
Read moreCompatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
-
M1217540
Read moreHardware Fits: AEC 34mm Holder 3434HC