Vecoplan® compatible right hand anvil, D2 Material, for Model RG42, RG42/60XL, VAZ1100, OEM# 3590000325, 3590000338, 3591000535R
| Make | Vecoplan® |
| OEM Number | 3590000325, 3590000338, 3591000535R |
| Shredder Model | RG42, RG42/60XL, VAZ1100 |
| C-C Number | 4200RGRH |
| Length | 21.000 |
| Width | 4.250 |
| Thickness | 1.408 |
| Knife Type | Raised |
| Reversible | No |
| Hole Type | CBS |
| Thread | M12x1.75 |
| Tooth Style | Sharp |
Vecoplan® compatible left hand anvil, flat top tooth, D2 Material, for Model RG42UXL, RS42/60XL, VAZ 1100P, VHZ 1600, OEM# 3591000539L
Vecoplan® compatible 40mm concave cutter, angled corner, D2 Material, for Model V-Echo, OEM# 3530000239
Compatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Compatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
Compatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
Compatible with Vecoplan®, 40mm Flat Nip, D2 Material
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
Vecoplan® compatible right hand anvil, flat top tooth, D2 Material for Model RG42UXL, RS42/60XL, VAZ 1100P, VHZ 1600, OEM# 3590000402, 3590000327, 3591000538R
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
Compatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
Cresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.
Holder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher
AEC® 34mm Holder, 2 mounting holes for M8 fastener. Hardware Available Upon Request. Used for 343420CR. Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders.
Hardware Fits: AEC 34mm Holder 3434HC
Copyright 2023. Crumb-Cut / A-American Machine & Assembly Co.
