Description
| Make | Weima® |
|---|---|
| OEM Number | |
| C-C Number | 404023CR |
| Length | 1.575 |
| Width | 1.575 |
| Thickness | 0.906 |
| Knife Type | Raised |
| Reversible | No |
| # Cutting Edges | 4 |
| # of Holes | 1 |
| Hole Type | TPD |
| Thread | M12 x 1.75 |
404023CR
Compatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
You may also like…
-
15WLK3354015C
Read moreWeima® compatible center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536
-
4040WHC
Read moreWeima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR
-
15WLK2364015
Read moreWeima® compatible right hand anvil, 9.287″ x 4.598″ x 0.610″, 3 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000533
-
4040WHCB
Read moreWeima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR
-
404023C
Read moreWeima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
-
15WLK2794015
Read moreWeima® compatible right center anvil, 10.997″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000534
-
404023CS
Read moreCompatible with Weima®40mm concave, serrated edges, D2 Material, Uses Holder 4040WHC or 4040WHCB
-
15WLK3354015L
Read moreWeima® compatible left center anvil, 13.202″ x 4.598″ x 0.610″, 5 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000536
-
M1217545FL
Read moreSerrated Flange Type Cutter Bolt, Fits 40mm cutter
-
15WLK2924015
Read moreWeima® compatible left hand anvil, 11.510″ x 4.598″ x 0.610″, 4 full teeth, 2 half teeth angle with 2 counter-sunk holes, A8 Material, for Model WLK 15, OEM# 009002000537
Related products
-
4040HC
Read moreCompatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
-
343420CR
Read moreAEC 34mm Crown Style with Raised Center. 34MM X 34mm X 20mm – Material: D2 Uses Holder: 3434HC Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders
-
125125745F
Read moreCresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
4040HCL
Read moreCompatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.