Vecoplan® compatible flat reversible anvil, 10 full teeth, 1 half tooth, sharp teeth, 2 cutting edges, 4 counterbored slots, D2 Material, for Model RG70/200K, RG70/200XLT, VAZ1800XL, OEM# 3590000201
| Make | Vecoplan® |
| OEM Number | 3590000201 |
| Shredder Model | RG70/200K
RG70/200XLT VAZ1800XL |
| C-C Number | 70200RGXL |
| Length | 17.657 |
| Width | 4.34 |
| Thickness | 0.984 |
| Knife Type | Anvil |
| Reversible | Yes |
| # Cutting Edges | 2 |
| # of Holes | 4 |
| Hole Type | Slot |
| Thread | None |
Compatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
Compatible with Vecoplan®, 40mm Flat Nip, D2 Material
Compatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
Compatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
AEC® 34mm Holder, 2 mounting holes for M8 fastener. Hardware Available Upon Request. Used for 343420CR. Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders.
Weima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
Chinese Shredder Crown Style. 40mm X 40mm X 25mm – Material: D2
Cutter bolt Socket Head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher
Copyright 2023. Crumb-Cut / A-American Machine & Assembly Co.
