Vecoplan® compatible flat reversible anvil, 5 full teeth, 2 half teeth, 3 counterbored slots, 2 tapered holes, for 40 mm cutter center, 3 or 4 per set, D2 Material, for Model VAZ1800 F&F, RG52, RG62, OEM# 3591000803M, 3591000804C
| Make | Vecoplan® |
| OEM Number | 3591000804C
3591000803M |
| Shredder Model | VAZ1800 F&F
RG52 RG62 |
| C-C Number | 1800VAZ40MC |
| Length | 10.119 |
| Width | 3.668 |
| Thickness | 1.118 |
| Knife Type | Anvil |
| Reversible | Yes |
| # Cutting Edges | 1 |
| # of Holes | 2 |
| Hole Type | TPD |
| Thread | M12 x 1.75 |
Compatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
Compatible with Vecoplan® / Retech 40mm Flat style, 40mm x 40mm x 20mm – Material: D2. Uses Holder 4040H or 4040HC or 4040HCL
Compatible with Vecoplan®, 40mm Flat Nip, D2 Material
Compatible with Vecoplan®/Retech, 40mm Holder Long – C’Bore. For 20″ Rotors. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F.
Compatible with Vecoplan® / Retech 40mm holder. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404020F
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, D2 Material.
Compatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2
Compatible with Vecoplan®, 40mm Flat Nip counter-bored, serrated edges, D2 Material.
Compatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
Compatible with Vecoplan®, 40mm concave raised center, serrated edges, D2 Material. Uses holder 4040H, 4040HC, or 4040HCL. Uses fastener M1217570 or M1217570H.
Cutter bolt Socket Head Fits: 40mm raised center Uses M12HCLW – Lockwasher
AEC® 34mm Holder, 2 mounting holes for M8 fastener. Hardware Available Upon Request. Used for 343420CR. Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders.
Cresswood® 1-1/4″ Gripper with counter bored hole, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2.
Cutter bolt Socket Head Fits: 40mm concave cutter Uses M12HCLW – Lockwasher
Copyright 2023. Crumb-Cut / A-American Machine & Assembly Co.
