Description
| Make | Vecoplan® |
| OEM Number | 7309200063 |
| C-C Number | 8080HCHF |
| Length | 3.136 |
| Width | 3.135 |
| Thickness | 4.920 |
| Knife Type | N/A |
| Reversible | No |
| # Cutting Edges | N/A |
| # of Holes | 1 |
| Hole Type | Through |
| Thread | None |
8080HCHF
Vecoplan® compatible 80mm holder, counterbored, hard face on two sides, CRS material, use for 808045CR or 808045C, OEM# 7309200063
You may also like…
-
9825080RGLHRH
Read moreVecoplan® compatible left or right hand anvil, reversible, 4 full teeth, 1 half tooth, D2 Material, for Model RG98
-
808045C
Read moreVecoplan® compatible 80mm concave cutter, D2 Material
-
9825080RGCTR
Read moreVecoplan® compatible center anvil, reversible, 5 full teeth, D2 Material, for Model RG98
-
808045CR
Read moreCompatible with Vecoplan® 80mm Concave, Raised Center, D2 Material. Uses Holder 8080HC or 8080HCHF.
Related products
-
404023CR
Read moreCompatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
-
Your Part Coming Soon
Read moreIf you didn’t see your particular part, then please fill out as much information on the form to your left and well will work on reverse engineering it to meet or exceed OEM standards.
-
4040HC
Read moreCompatible with Vecoplan®/Retech, 40mm holder – Counter-Bored. Hardware available upon request. Use with 404020CR, 404020C, 404020CRS, 404025F & 404020F
-
M1217555
Read moreHolder Bolt Fits: Holder 4040HC. Uses M12HCLW – Lockwasher