Description
| Make | Vecoplan® |
| Shredder Model | RG98 |
| C-C Number | 9825080RGLHRH |
| Length | 14.980 |
| Width | 4.720 |
| Thickness | 1.082 |
| Knife Type | Flat |
| Reversible | Yes |
| Hole Type | CBT |
| Tooth Style | Sharp |
| Thread | M12x1.75 |
9825080RGLHRH
Vecoplan® compatible left or right hand anvil, reversible, 4 full teeth, 1 half tooth, D2 Material, for Model RG98
You may also like…
-
808045CR
Read moreCompatible with Vecoplan® 80mm Concave, Raised Center, D2 Material. Uses Holder 8080HC or 8080HCHF.
-
9825080RGCTR
Read moreVecoplan® compatible center anvil, reversible, 5 full teeth, D2 Material, for Model RG98
-
8080HCHF
Read moreVecoplan® compatible 80mm holder, counterbored, hard face on two sides, CRS material, use for 808045CR or 808045C, OEM# 7309200063
-
808045C
Read moreVecoplan® compatible 80mm concave cutter, D2 Material
Related products
-
404023CR
Read moreCompatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
-
125125745CR
Read moreCresswood® 1-1/4″ Crown Style with Raised Center, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
404023C
Read moreWeima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
-
3434HC
Read moreAEC® 34mm Holder, 2 mounting holes for M8 fastener. Hardware Available Upon Request. Used for 343420CR. Fits: Cumberland®, Nelmor®, Ball & Jewel®, ColorTronic®, Econogrind® and Zerma® Shredders.