Description
| Make | Weima® |
|---|---|
| OEM Number | 009001000009 |
| C-C Number | 4040WHCB |
| Length | 1.625 |
| Width | 1.530 |
| Thickness | 1.530 |
| Knife Type | Flat |
| Reversible | No |
| # Cutting Edges | 0 |
| # of Holes | 1 |
| Hole Type | Counter Bored |
| Thread |
4040WHCB
Weima® 40mm Holder Counter Bore, has 2 extra bevels for welding. Hardware available upon request. Use with 404023C or 404023CR
You may also like…
-
404023CR
Read moreCompatible with Weima® 40mm Crown Style with Raised Center, 40mm x 40mm x 23mm – Material: D2 Uses Holder 4040WHC
-
404023CS
Read moreCompatible with Weima®40mm concave, serrated edges, D2 Material, Uses Holder 4040WHC or 4040WHCB
-
4040WHC
Read moreWeima® 40mm Holder Counter Bore, Hardware available upon request. Use with 404023C or 404023CR
-
404023C
Read moreWeima® 40mm Crown Style, 40mm x 40mm x 23mm – Material: D2, Uses Holder 4040WHC
-
M1217545FL
Read moreSerrated Flange Type Cutter Bolt, Fits 40mm cutter
Related products
-
M1620045
Read moreBed Knife Bolt
-
125125745F
Read moreCresswood® 1-1/4″ Flat cutter, 1-1/4″ X 1-1/4″ X 3/4″ – Material: D2. Uses Holder 125125HC
-
404020CR
Read moreCompatible with Vecoplan® / Retech 40mm Crown Style with Raised Center, 40mm x 40mm x 20mm – Material: D2. Uses holder 4040H or 4040HC or 4040HCL. Uses fastener M1217570 or M1217570H.
-
404020C
Read moreCompatible with Vecoplan® / Retech, Granutech®, Gross®, Komar®, NGR®, Republic®, or Votex®, 40mm Crown Style, 40mm x 40mm x 20mm – Material: D2